Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Honeywell Air Duct Cleaning in Long Beach: What to Know First
Honeywell air duct cleaning in Long Beach typically runs $450 to $1,200 for a full residential system, depending on the home’s square footage and how many returns and supplies are in the HVAC layout. We are an independent Honeywell service provider at Hollis Air Duct Long Beach, which means we service Honeywell-branded systems, filtration units, and ductwork without being tied to factory pricing or parts markup rules. Most Honeywell jobs are completed in three to six hours, and you get a written price before any equipment comes off the truck.
This page is for homeowners in Long Beach who own a Honeywell system, use Honeywell filters or media cabinets, and want to know exactly what duct cleaning involves on their equipment. If you have questions after reading, call (562) 548-7365. A live person answers, and the estimate is free.
Key takeaways:
- We service Honeywell filters, media cabinets, and the ductwork connected to them. We are not authorized by Honeywell, and we do not pretend to be.
- A full-system cleaning on a Honeywell setup in Long Beach ranges from $450 to $1,200. The price is written before work starts and does not move.
- Every job carries the 365-Day Done Right Promise in writing. If the work fails within a year, we return and make it right at no charge.
How Honeywell Products Fail – and How We Fix Them
We see a lot of Honeywell equipment in Long Beach homes, especially the media air cleaners in older tract housing and the electronic air cleaners still running in 1970s and 1980s builds. Here is what actually goes wrong with them, and what we do about it.
- Honeywell Electronic Air Cleaners (F50, F300 series): These units charge collector cells to trap particles, but when the cells get coated with dust and the airflow drops, the charge weakens and the unit stops catching what it should. In Long Beach, the residual moisture from marine air accelerates cell coating. We remove the cells, clean them with the correct non-caustic solution, verify the contacts are dry, and then clean the return and supply duct runs feeding the unit. A dirty duct system upstream of an EAC loads the cells again within weeks.
- Honeywell Media Air Cleaners (F100, F200 series): The 4- and 5-inch media filters in these cabinets do a solid job, but we regularly find the filter bypassing air because the access door gasket has flattened on older Long Beach homes, or because a previous tech installed a 1-inch filter in a 5-inch track and called it good. That lets unfiltered air pull directly into the blower. When we clean the duct system, we check the media cabinet fit, replace the gasket if the door leaks, and confirm the correct filter depth is in place. This matters because a bypassing filter means clean ducts get dirty fast, and the entire cleaning is undercut.
- Pre-1980 sheet metal trunks wrapped in asbestos tape: Plenty of Long Beach homes built in the 1950s and 1960s used Honeywell controls and thermostats alongside sheet metal ducts wrapped with asbestos tape. We do not disturb that material. During video inspection, we identify the wrap, flag it, and clean downstream sections with negative-air containment so no settled dust or fiber is released into the living space. Roy Castellanos learned early on from East L.A. tract homes that the right call is respect the material and clean around it, not tear into it because a camera saw dust.
- Honeywell UV systems sitting on top of dirty coils: UV air treatment only works on line-of-sight surfaces. When the coil below is packed with lint, salt air residue, and years of dust, the UV light treats a layer of grime instead of the airflow passing through. A duct cleaning that skips the coil area on a Honeywell UV setup is half a job. We include coil face inspection and light cleaning as part of the full-system service so the UV unit is actually treating what it was installed to treat.
- Return drops in Wrigley and Bixby Knolls slab foundations: We have pulled apart return drops in older Long Beach bungalows that were swallowing air through cracks in the subfloor chase, pulling crawlspace dust and humid marine air into the system, never making it to the Honeywell filter in the hall closet. The fix is not just a duct brush. We seal the return chase perimeter with duct mastic, clean the accessible return drops, and then run the system under negative air to verify the return is pulling from the conditioned space, not the crawlspace.
Every one of these failures is visible on a video inspection. We do not ask you to take our word for it. We show you the footage.
Styles & brands we work with




Our Honeywell Air Duct Cleaning Process
- 1
Call and schedule: You talk to a live person. We book a window, and we arrive inside it. No callbacks, no waiting until Monday.
- 2
Walkthrough and written price: We inspect the whole system by eye and with a camera probe. You get a written price for the full job before any disassembly starts. That price does not change.
- 3
HVAC protection and containment: We seal off supply registers, block the blower, and mask the coil area. Negative-air machines pull a vacuum on the system so dust is not pushed into your living room while we work.
- 4
Mechanical agitation per duct run: The Rotobrush rotary system runs through each supply and return run. Honeywell filtration housings are opened, filter access is checked for bypass, and the media cabinet is wiped and reseated.
- 5
Post-clean video check and filter confirmation: We run the camera again after cleaning, confirm the filter is seated correctly, and walk you through before-and-after footage of your own ducts.
- 6
Written guarantee: We leave you with the 365-Day Done Right Promise in writing. If anything fails on the cleaning within a year, we return at no charge. That includes a free second visit, not a negotiated callback.
See the difference
Before
After
Before
After
Before
AfterWhat Honeywell Air Duct Cleaning Costs in Long Beach
Here are the honest ranges we quote in Long Beach. These are whole-system prices, not a teaser price that becomes an invoice for triple once a crew is inside.
| Service | Typical Range in Long Beach |
|---|---|
| Full residential duct cleaning (up to 10 vents) | $450 – $750 |
| Larger homes / 11 – 20 vents with Honeywell media cabinet | $650 – $950 |
| Full cleaning plus return chase sealing (slab foundations) | $800 – $1,200 |
| Commercial duct cleaning (per system size) | $900 – $2,500 |
What moves the price is the square footage of conditioned space, how many supply and return runs exist, the age of the duct material, and whether the return chases need mastic sealing. Not the brand name on the thermostat. We price per system, in writing, before work starts. Call (562) 548-7365 for a free estimate on your specific home.
Why Long Beach Homeowners Call Hollis Air Duct Long Beach for Honeywell Work
Roy Castellanos runs Hollis Air Duct Long Beach the same way he ran jobs after finishing the HVAC program at East Los Angeles College years ago: show up inside the window, price it in writing, and do not leave until the airflow is measurably cleaner than what was there before. Every technician is background-checked and uniformed. Every job carries the 365-Day Done Right Promise. If the system loads back up within a year, we come back and correct it. No negotiation, no fee.
We use professional-grade equipment from Rotobrush and Nikro, not hardware-store gear. We service Honeywell, but we also work on Lennox, Trane, and Carrier duct systems daily, so our techs have seen every common cabinet design in Long Beach. The price is written before the work starts. The site is left clean. The after footage gets shown before we pack the van. That is the whole offer. Call (562) 548-7365.
FAQs
No. Routine air duct cleaning does not void a Honeywell equipment warranty, provided the cleaning contractor does not modify or bypass the filtration cabinet, wiring, or controls. We clean to the equipment interface and do not alter factory components. We are an independent Honeywell service provider, not an authorized one, and we work to preserve the warranty, not work around it.
A full-system Honeywell duct cleaning in Long Beach runs $450 to $1,200 for residential properties. The price depends on the number of vents, home size, and whether return chases need sealing. We quote per system in writing before work begins. Call (562) 548-7365 for a free estimate on your exact layout.
Because they are per-vent teaser prices that balloon into a much larger invoice once the crew is on site. We do not do per-vent pricing or bait-and-switch coupons. We price the entire system in writing up front. If a quote looks too low to support a trained crew with real equipment, it probably is.
You watch the before-and-after video. We run a camera through the ducts before we start and again after the cleaning. You see your own ducts on screen, not a stock photo. If the after footage does not show clear airflow paths, we do not sign off and neither should you. The 365-Day Done Right Promise also covers us in writing: if the system loads up within a year, we return at no charge.
Every 3 to 5 years for most Long Beach homes, and more often if you run the AC heavily, live near the coast where marine air pushes more moisture into the return side, or have pets. The real signal is debris load, not a calendar. If you see dust accumulating on supply vents weeks after a cleaning, or the Honeywell filter loads up faster than its rated interval, call (562) 548-7365 and we will camera-check the system before quoting anything.
Written by Roy Castellanos, Owner, Hollis Air Duct Long Beach at Hollis Air Duct Long Beach, serving Long Beach and nearby areas.